Co and Ni ferrospinels as catalysts for propane total oxidation

Adriana Urdǎ, Adrien Herraïz, Ákos Rédey, Ioan Cezar Marcu

Research output: Contribution to journalArticle

38 Citations (Scopus)

Abstract

Co and Ni ferrospinels were prepared by coprecipitation and by mechano-chemical method, characterized using XRD, N2 adsorption, EDX and H2-TPR techniques and tested in the catalytic total oxidation of propane within the temperature range of 250-600 °C. Depending on the ferrospinel composition, the method of preparing it and the reaction conditions, total conversion to CO2 was observed at temperatures between 400 °C and 500 °C. The best results were obtained with the Co ferrite catalyst prepared by coprecipitation, which gives total conversion at temperatures as low as 400 °C. The ferrospinel catalysts showed a good stability during the catalytic test.

Original languageEnglish
Pages (from-to)1651-1655
Number of pages5
JournalCatalysis Communications
Volume10
Issue number13
DOIs
Publication statusPublished - Jul 25 2009

    Fingerprint

Keywords

  • Ferrospinels
  • Propane
  • Total oxidation

ASJC Scopus subject areas

  • Catalysis
  • Chemistry(all)
  • Process Chemistry and Technology

Cite this