Characterization of topography of cut surface based on theoretical roughness indexes

Csaba Felho, J. Kundrák

Research output: Chapter in Book/Report/Conference proceedingConference contribution

20 Citations (Scopus)

Abstract

The microgeometry of cut surfaces is one important characteristic of surface quality, since it has significant influence on the tribological properties of working surfaces. In addition to the ability to plan the economical effectiveness of cutting and the accuracy of workpieces the ability to plan the quality of machined surfaces has also emphasized importance. This is why the predictability of surface roughness in planning of technological processes is more and more important. More and more opportunities presenting themselves and one of these is the estimation of the expected value of roughness of the machined surface on the basis of the theoretical value of roughness. The paper focuses on the introduction of a method to describe a mathematical relation between the theoretical and the measured roughness indexes in cutting with tools having defined edge geometry, thus the planning may be more accurate.

Original languageEnglish
Title of host publicationKey Engineering Materials
Pages194-199
Number of pages6
Volume496
DOIs
Publication statusPublished - 2012
Event6th International Congress of Precision Machining, ICPM2011 - Liverpool, Merseyside, United Kingdom
Duration: Sep 13 2011Sep 15 2011

Publication series

NameKey Engineering Materials
Volume496
ISSN (Print)10139826

Other

Other6th International Congress of Precision Machining, ICPM2011
CountryUnited Kingdom
CityLiverpool, Merseyside
Period9/13/119/15/11

Fingerprint

Topography
Surface roughness
Planning
Surface properties
Geometry

Keywords

  • Surface roughness
  • Theoretical roughness

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Felho, C., & Kundrák, J. (2012). Characterization of topography of cut surface based on theoretical roughness indexes. In Key Engineering Materials (Vol. 496, pp. 194-199). (Key Engineering Materials; Vol. 496). https://doi.org/10.4028/www.scientific.net/KEM.496.194

Characterization of topography of cut surface based on theoretical roughness indexes. / Felho, Csaba; Kundrák, J.

Key Engineering Materials. Vol. 496 2012. p. 194-199 (Key Engineering Materials; Vol. 496).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Felho, C & Kundrák, J 2012, Characterization of topography of cut surface based on theoretical roughness indexes. in Key Engineering Materials. vol. 496, Key Engineering Materials, vol. 496, pp. 194-199, 6th International Congress of Precision Machining, ICPM2011, Liverpool, Merseyside, United Kingdom, 9/13/11. https://doi.org/10.4028/www.scientific.net/KEM.496.194
Felho, Csaba ; Kundrák, J. / Characterization of topography of cut surface based on theoretical roughness indexes. Key Engineering Materials. Vol. 496 2012. pp. 194-199 (Key Engineering Materials).
@inproceedings{076ed77fb7c2497caa756aa8bd70ba53,
title = "Characterization of topography of cut surface based on theoretical roughness indexes",
abstract = "The microgeometry of cut surfaces is one important characteristic of surface quality, since it has significant influence on the tribological properties of working surfaces. In addition to the ability to plan the economical effectiveness of cutting and the accuracy of workpieces the ability to plan the quality of machined surfaces has also emphasized importance. This is why the predictability of surface roughness in planning of technological processes is more and more important. More and more opportunities presenting themselves and one of these is the estimation of the expected value of roughness of the machined surface on the basis of the theoretical value of roughness. The paper focuses on the introduction of a method to describe a mathematical relation between the theoretical and the measured roughness indexes in cutting with tools having defined edge geometry, thus the planning may be more accurate.",
keywords = "Surface roughness, Theoretical roughness",
author = "Csaba Felho and J. Kundr{\'a}k",
year = "2012",
doi = "10.4028/www.scientific.net/KEM.496.194",
language = "English",
isbn = "9783037852972",
volume = "496",
series = "Key Engineering Materials",
pages = "194--199",
booktitle = "Key Engineering Materials",

}

TY - GEN

T1 - Characterization of topography of cut surface based on theoretical roughness indexes

AU - Felho, Csaba

AU - Kundrák, J.

PY - 2012

Y1 - 2012

N2 - The microgeometry of cut surfaces is one important characteristic of surface quality, since it has significant influence on the tribological properties of working surfaces. In addition to the ability to plan the economical effectiveness of cutting and the accuracy of workpieces the ability to plan the quality of machined surfaces has also emphasized importance. This is why the predictability of surface roughness in planning of technological processes is more and more important. More and more opportunities presenting themselves and one of these is the estimation of the expected value of roughness of the machined surface on the basis of the theoretical value of roughness. The paper focuses on the introduction of a method to describe a mathematical relation between the theoretical and the measured roughness indexes in cutting with tools having defined edge geometry, thus the planning may be more accurate.

AB - The microgeometry of cut surfaces is one important characteristic of surface quality, since it has significant influence on the tribological properties of working surfaces. In addition to the ability to plan the economical effectiveness of cutting and the accuracy of workpieces the ability to plan the quality of machined surfaces has also emphasized importance. This is why the predictability of surface roughness in planning of technological processes is more and more important. More and more opportunities presenting themselves and one of these is the estimation of the expected value of roughness of the machined surface on the basis of the theoretical value of roughness. The paper focuses on the introduction of a method to describe a mathematical relation between the theoretical and the measured roughness indexes in cutting with tools having defined edge geometry, thus the planning may be more accurate.

KW - Surface roughness

KW - Theoretical roughness

UR - http://www.scopus.com/inward/record.url?scp=84855813062&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84855813062&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.496.194

DO - 10.4028/www.scientific.net/KEM.496.194

M3 - Conference contribution

AN - SCOPUS:84855813062

SN - 9783037852972

VL - 496

T3 - Key Engineering Materials

SP - 194

EP - 199

BT - Key Engineering Materials

ER -