Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys

Viktória Rontó, Anna Sycheva, J. Sólyom, Péter Pekker, Ildikó Cora, Éva Fazakas

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Ti60(NixCu40-x)40 x = 5 - 40 at% ternary alloys were prepared by arc-melting followed by a centrifugal casting into a wedge-shaped copper mould in order to examine glass forming of these compositions. Microstructure of the master alloys and wedge-shaped samples were studied. Among the master alloys, which solidified under non-equilibrium conditions, the sample with 15 at% Ni content displayed clear eutectic structure and its wedge-shaped sample had the finest structure but still crystalline. Microstructure of the other compositions was far from amorphous state.

Original languageEnglish
Title of host publicationMaterials Science Forum
PublisherTrans Tech Publications Ltd
Pages491-496
Number of pages6
Volume790-791
ISBN (Print)9783038350934
DOIs
Publication statusPublished - 2014
Event6th International Conference on Solidification and Gravity - Miskolc, Lillafured, Hungary
Duration: Sep 2 2013Sep 5 2013

Publication series

NameMaterials Science Forum
Volume790-791
ISSN (Print)02555476

Other

Other6th International Conference on Solidification and Gravity
CountryHungary
CityMiskolc, Lillafured
Period9/2/139/5/13

Fingerprint

wedges
Centrifugal casting
microstructure
Microstructure
Ternary alloys
Chemical analysis
centrifugal casting
Eutectics
Copper
arc melting
nonequilibrium conditions
Melting
ternary alloys
Crystalline materials
Glass
eutectics
fine structure
copper
glass

Keywords

  • Master alloy
  • Microstructure
  • Solidification
  • Ti based alloys

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Rontó, V., Sycheva, A., Sólyom, J., Pekker, P., Cora, I., & Fazakas, É. (2014). Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys. In Materials Science Forum (Vol. 790-791, pp. 491-496). (Materials Science Forum; Vol. 790-791). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.790-791.491

Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys. / Rontó, Viktória; Sycheva, Anna; Sólyom, J.; Pekker, Péter; Cora, Ildikó; Fazakas, Éva.

Materials Science Forum. Vol. 790-791 Trans Tech Publications Ltd, 2014. p. 491-496 (Materials Science Forum; Vol. 790-791).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rontó, V, Sycheva, A, Sólyom, J, Pekker, P, Cora, I & Fazakas, É 2014, Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys. in Materials Science Forum. vol. 790-791, Materials Science Forum, vol. 790-791, Trans Tech Publications Ltd, pp. 491-496, 6th International Conference on Solidification and Gravity, Miskolc, Lillafured, Hungary, 9/2/13. https://doi.org/10.4028/www.scientific.net/MSF.790-791.491
Rontó V, Sycheva A, Sólyom J, Pekker P, Cora I, Fazakas É. Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys. In Materials Science Forum. Vol. 790-791. Trans Tech Publications Ltd. 2014. p. 491-496. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.790-791.491
Rontó, Viktória ; Sycheva, Anna ; Sólyom, J. ; Pekker, Péter ; Cora, Ildikó ; Fazakas, Éva. / Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys. Materials Science Forum. Vol. 790-791 Trans Tech Publications Ltd, 2014. pp. 491-496 (Materials Science Forum).
@inproceedings{f45ce58bb28142a4acf8b7aea3ad9c99,
title = "Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys",
abstract = "Ti60(NixCu40-x)40 x = 5 - 40 at{\%} ternary alloys were prepared by arc-melting followed by a centrifugal casting into a wedge-shaped copper mould in order to examine glass forming of these compositions. Microstructure of the master alloys and wedge-shaped samples were studied. Among the master alloys, which solidified under non-equilibrium conditions, the sample with 15 at{\%} Ni content displayed clear eutectic structure and its wedge-shaped sample had the finest structure but still crystalline. Microstructure of the other compositions was far from amorphous state.",
keywords = "Master alloy, Microstructure, Solidification, Ti based alloys",
author = "Vikt{\'o}ria Ront{\'o} and Anna Sycheva and J. S{\'o}lyom and P{\'e}ter Pekker and Ildik{\'o} Cora and {\'E}va Fazakas",
year = "2014",
doi = "10.4028/www.scientific.net/MSF.790-791.491",
language = "English",
isbn = "9783038350934",
volume = "790-791",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "491--496",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Characterization of the solidifying microstructure in Ti60(NixCu40-x)40 alloys

AU - Rontó, Viktória

AU - Sycheva, Anna

AU - Sólyom, J.

AU - Pekker, Péter

AU - Cora, Ildikó

AU - Fazakas, Éva

PY - 2014

Y1 - 2014

N2 - Ti60(NixCu40-x)40 x = 5 - 40 at% ternary alloys were prepared by arc-melting followed by a centrifugal casting into a wedge-shaped copper mould in order to examine glass forming of these compositions. Microstructure of the master alloys and wedge-shaped samples were studied. Among the master alloys, which solidified under non-equilibrium conditions, the sample with 15 at% Ni content displayed clear eutectic structure and its wedge-shaped sample had the finest structure but still crystalline. Microstructure of the other compositions was far from amorphous state.

AB - Ti60(NixCu40-x)40 x = 5 - 40 at% ternary alloys were prepared by arc-melting followed by a centrifugal casting into a wedge-shaped copper mould in order to examine glass forming of these compositions. Microstructure of the master alloys and wedge-shaped samples were studied. Among the master alloys, which solidified under non-equilibrium conditions, the sample with 15 at% Ni content displayed clear eutectic structure and its wedge-shaped sample had the finest structure but still crystalline. Microstructure of the other compositions was far from amorphous state.

KW - Master alloy

KW - Microstructure

KW - Solidification

KW - Ti based alloys

UR - http://www.scopus.com/inward/record.url?scp=84901464825&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84901464825&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.790-791.491

DO - 10.4028/www.scientific.net/MSF.790-791.491

M3 - Conference contribution

SN - 9783038350934

VL - 790-791

T3 - Materials Science Forum

SP - 491

EP - 496

BT - Materials Science Forum

PB - Trans Tech Publications Ltd

ER -