Characteristics of a new type of cylindrical worm gear drive

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

Abstract

A new type of cylindrical worm gear drive is presented. The worm is ground by a grinding wheel whose profile consists of two circular arcs, and the obtained worm profile is concave. The teeth of the gear are processed by a hob whose generator surface is identical to the worm surface. In order to compare the operating characteristics of the new type and of the commonly use worm gear drives, the tooth contact analysis, the load distribution calculation, and the termoelastohydrodynamic lubrication analysis of different types of worm gears have been carried out. The obtained results show the advantages of the new type of worm gear. The results of the load distribution calculation and EHD lubrication analysis are also used for the optimization of the design parameters of the new type of worm gear drive.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Design Engineering Division (Publication) DE
Pages133-140
Number of pages8
Volume88
Publication statusPublished - 1996

Fingerprint

Worm gears
Gear teeth
Lubrication
Electrohydrodynamics
Grinding wheels
Gears

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Engineering(all)

Cite this

Simon, V. (1996). Characteristics of a new type of cylindrical worm gear drive. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE (Vol. 88, pp. 133-140)

Characteristics of a new type of cylindrical worm gear drive. / Simon, V.

American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Vol. 88 1996. p. 133-140.

Research output: Chapter in Book/Report/Conference proceedingChapter

Simon, V 1996, Characteristics of a new type of cylindrical worm gear drive. in American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. vol. 88, pp. 133-140.
Simon V. Characteristics of a new type of cylindrical worm gear drive. In American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Vol. 88. 1996. p. 133-140
Simon, V. / Characteristics of a new type of cylindrical worm gear drive. American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Vol. 88 1996. pp. 133-140
@inbook{7cd72fda5db941c79d2197e604077c82,
title = "Characteristics of a new type of cylindrical worm gear drive",
abstract = "A new type of cylindrical worm gear drive is presented. The worm is ground by a grinding wheel whose profile consists of two circular arcs, and the obtained worm profile is concave. The teeth of the gear are processed by a hob whose generator surface is identical to the worm surface. In order to compare the operating characteristics of the new type and of the commonly use worm gear drives, the tooth contact analysis, the load distribution calculation, and the termoelastohydrodynamic lubrication analysis of different types of worm gears have been carried out. The obtained results show the advantages of the new type of worm gear. The results of the load distribution calculation and EHD lubrication analysis are also used for the optimization of the design parameters of the new type of worm gear drive.",
author = "V. Simon",
year = "1996",
language = "English",
volume = "88",
pages = "133--140",
booktitle = "American Society of Mechanical Engineers, Design Engineering Division (Publication) DE",

}

TY - CHAP

T1 - Characteristics of a new type of cylindrical worm gear drive

AU - Simon, V.

PY - 1996

Y1 - 1996

N2 - A new type of cylindrical worm gear drive is presented. The worm is ground by a grinding wheel whose profile consists of two circular arcs, and the obtained worm profile is concave. The teeth of the gear are processed by a hob whose generator surface is identical to the worm surface. In order to compare the operating characteristics of the new type and of the commonly use worm gear drives, the tooth contact analysis, the load distribution calculation, and the termoelastohydrodynamic lubrication analysis of different types of worm gears have been carried out. The obtained results show the advantages of the new type of worm gear. The results of the load distribution calculation and EHD lubrication analysis are also used for the optimization of the design parameters of the new type of worm gear drive.

AB - A new type of cylindrical worm gear drive is presented. The worm is ground by a grinding wheel whose profile consists of two circular arcs, and the obtained worm profile is concave. The teeth of the gear are processed by a hob whose generator surface is identical to the worm surface. In order to compare the operating characteristics of the new type and of the commonly use worm gear drives, the tooth contact analysis, the load distribution calculation, and the termoelastohydrodynamic lubrication analysis of different types of worm gears have been carried out. The obtained results show the advantages of the new type of worm gear. The results of the load distribution calculation and EHD lubrication analysis are also used for the optimization of the design parameters of the new type of worm gear drive.

UR - http://www.scopus.com/inward/record.url?scp=0030409050&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030409050&partnerID=8YFLogxK

M3 - Chapter

VL - 88

SP - 133

EP - 140

BT - American Society of Mechanical Engineers, Design Engineering Division (Publication) DE

ER -