Alloying and amorphization by surface mechanical treatment

Ádám Révész, Laszlo Takacs

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Metallic plates were coated mechanically with powders by surface treatment in a SPEX 8000 Mixer Mill. Al disks were coated by harder Ni particles, while a Zr-Ti powder blend was deposited onto Cu targets. The microstructure and morphology of the coatings were investigated by scanning electron microscopy and X-ray diffraction. Mechanical properties were studied by dynamic hardness tests.

Original languageEnglish
Title of host publicationMaterials Science Forum
Pages239-244
Number of pages6
Volume659
DOIs
Publication statusPublished - 2010
Event7th Hungarian Conference on Materials Science - Balatonkenese, Hungary
Duration: Oct 11 2009Oct 13 2009

Publication series

NameMaterials Science Forum
Volume659
ISSN (Print)02555476

Other

Other7th Hungarian Conference on Materials Science
CountryHungary
CityBalatonkenese
Period10/11/0910/13/09

Fingerprint

Amorphization
Alloying
Powders
alloying
hardness tests
surface treatment
Surface treatment
Hardness
mechanical properties
coatings
X ray diffraction
Coatings
Mechanical properties
microstructure
Microstructure
Scanning electron microscopy
scanning electron microscopy
diffraction
x rays

Keywords

  • Alloying
  • Coating
  • Solid state amorphization
  • Surface

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Révész, Á., & Takacs, L. (2010). Alloying and amorphization by surface mechanical treatment. In Materials Science Forum (Vol. 659, pp. 239-244). (Materials Science Forum; Vol. 659). https://doi.org/10.4028/www.scientific.net/MSF.659.239

Alloying and amorphization by surface mechanical treatment. / Révész, Ádám; Takacs, Laszlo.

Materials Science Forum. Vol. 659 2010. p. 239-244 (Materials Science Forum; Vol. 659).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Révész, Á & Takacs, L 2010, Alloying and amorphization by surface mechanical treatment. in Materials Science Forum. vol. 659, Materials Science Forum, vol. 659, pp. 239-244, 7th Hungarian Conference on Materials Science, Balatonkenese, Hungary, 10/11/09. https://doi.org/10.4028/www.scientific.net/MSF.659.239
Révész Á, Takacs L. Alloying and amorphization by surface mechanical treatment. In Materials Science Forum. Vol. 659. 2010. p. 239-244. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.659.239
Révész, Ádám ; Takacs, Laszlo. / Alloying and amorphization by surface mechanical treatment. Materials Science Forum. Vol. 659 2010. pp. 239-244 (Materials Science Forum).
@inproceedings{89f0fcc08d884ea3af7f2ce57233f5e3,
title = "Alloying and amorphization by surface mechanical treatment",
abstract = "Metallic plates were coated mechanically with powders by surface treatment in a SPEX 8000 Mixer Mill. Al disks were coated by harder Ni particles, while a Zr-Ti powder blend was deposited onto Cu targets. The microstructure and morphology of the coatings were investigated by scanning electron microscopy and X-ray diffraction. Mechanical properties were studied by dynamic hardness tests.",
keywords = "Alloying, Coating, Solid state amorphization, Surface",
author = "{\'A}d{\'a}m R{\'e}v{\'e}sz and Laszlo Takacs",
year = "2010",
doi = "10.4028/www.scientific.net/MSF.659.239",
language = "English",
isbn = "0878492356",
volume = "659",
series = "Materials Science Forum",
pages = "239--244",
booktitle = "Materials Science Forum",

}

TY - GEN

T1 - Alloying and amorphization by surface mechanical treatment

AU - Révész, Ádám

AU - Takacs, Laszlo

PY - 2010

Y1 - 2010

N2 - Metallic plates were coated mechanically with powders by surface treatment in a SPEX 8000 Mixer Mill. Al disks were coated by harder Ni particles, while a Zr-Ti powder blend was deposited onto Cu targets. The microstructure and morphology of the coatings were investigated by scanning electron microscopy and X-ray diffraction. Mechanical properties were studied by dynamic hardness tests.

AB - Metallic plates were coated mechanically with powders by surface treatment in a SPEX 8000 Mixer Mill. Al disks were coated by harder Ni particles, while a Zr-Ti powder blend was deposited onto Cu targets. The microstructure and morphology of the coatings were investigated by scanning electron microscopy and X-ray diffraction. Mechanical properties were studied by dynamic hardness tests.

KW - Alloying

KW - Coating

KW - Solid state amorphization

KW - Surface

UR - http://www.scopus.com/inward/record.url?scp=78649931464&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78649931464&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.659.239

DO - 10.4028/www.scientific.net/MSF.659.239

M3 - Conference contribution

AN - SCOPUS:78649931464

SN - 0878492356

SN - 9780878492350

VL - 659

T3 - Materials Science Forum

SP - 239

EP - 244

BT - Materials Science Forum

ER -