A comparison of the shaping characteristics of two nickel-titanium endodontic hand instruments

C. Dobó-Nagy, T. Serbán, J. Szabó, G. Nagy, M. Madléna

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Aim: The purpose of this study was to compare the shaping characteristics of Ni-Ti K-files and Ni-Ti S-files manipulated by hand. Methodology: A total of 60 extracted human roots were embedded in resin blocks. The embedded roots were divided into three groups: (i) roots with straight; (ii) apically curved; and (iii) continuously curved canals. Each of the three groups was randomly divided into two subgroups; one subgroup in each group was prepared with Ni-Ti K-files and the other with Ni-Ti S-files. The files were used with a step-back technique and enlarged so that the master apical file was size 30, and the canals were stepped back to size 40. The performance of the files was assessed by the superimposition of projected radiographs taken in bucco-lingual and mesio-distal directions before and after the preparation. The results were analysed statistically using analysis of covariance and Duncan's multiple range test. Results: Although canal preparation using Ni-Ti K-files was quicker, there were no statistically significant differences between file types. The Ni-Ti S-file removed significantly more material at the most coronal level (P <0.05). There were minor differences between instruments at the apical level. Only in the proximal view of apically curved canals prepared with Ni-Ti S-files was significantly more dentine removed from the outer aspect of the curvature (P <0.05). At the middle level (wide danger zone) the Ni-Ti S-files removed more dentine from the inner aspect of the curvature in those roots with apically curved canals. Conclusions: Under the conditions of this study, preparation with Ni-Ti K-files produced more appropriate shapes in roots with apically curved canals than Ni-Ti S-files.

Original languageEnglish
Pages (from-to)283-288
Number of pages6
JournalInternational Endodontic Journal
Volume35
Issue number3
DOIs
Publication statusPublished - Mar 2002

Fingerprint

Endodontics
Hand
Dentin
nitinol
titanium nickelide
Tongue

Keywords

  • Canal shaping
  • Hand files
  • Nickel-titanium
  • Root canals

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

A comparison of the shaping characteristics of two nickel-titanium endodontic hand instruments. / Dobó-Nagy, C.; Serbán, T.; Szabó, J.; Nagy, G.; Madléna, M.

In: International Endodontic Journal, Vol. 35, No. 3, 03.2002, p. 283-288.

Research output: Contribution to journalArticle

@article{f81a7c498fd24f9e86103217a08f692f,
title = "A comparison of the shaping characteristics of two nickel-titanium endodontic hand instruments",
abstract = "Aim: The purpose of this study was to compare the shaping characteristics of Ni-Ti K-files and Ni-Ti S-files manipulated by hand. Methodology: A total of 60 extracted human roots were embedded in resin blocks. The embedded roots were divided into three groups: (i) roots with straight; (ii) apically curved; and (iii) continuously curved canals. Each of the three groups was randomly divided into two subgroups; one subgroup in each group was prepared with Ni-Ti K-files and the other with Ni-Ti S-files. The files were used with a step-back technique and enlarged so that the master apical file was size 30, and the canals were stepped back to size 40. The performance of the files was assessed by the superimposition of projected radiographs taken in bucco-lingual and mesio-distal directions before and after the preparation. The results were analysed statistically using analysis of covariance and Duncan's multiple range test. Results: Although canal preparation using Ni-Ti K-files was quicker, there were no statistically significant differences between file types. The Ni-Ti S-file removed significantly more material at the most coronal level (P <0.05). There were minor differences between instruments at the apical level. Only in the proximal view of apically curved canals prepared with Ni-Ti S-files was significantly more dentine removed from the outer aspect of the curvature (P <0.05). At the middle level (wide danger zone) the Ni-Ti S-files removed more dentine from the inner aspect of the curvature in those roots with apically curved canals. Conclusions: Under the conditions of this study, preparation with Ni-Ti K-files produced more appropriate shapes in roots with apically curved canals than Ni-Ti S-files.",
keywords = "Canal shaping, Hand files, Nickel-titanium, Root canals",
author = "C. Dob{\'o}-Nagy and T. Serb{\'a}n and J. Szab{\'o} and G. Nagy and M. Madl{\'e}na",
year = "2002",
month = "3",
doi = "10.1046/j.1365-2591.2002.00492.x",
language = "English",
volume = "35",
pages = "283--288",
journal = "International Endodontic Journal",
issn = "0143-2885",
publisher = "Wiley-Blackwell",
number = "3",

}

TY - JOUR

T1 - A comparison of the shaping characteristics of two nickel-titanium endodontic hand instruments

AU - Dobó-Nagy, C.

AU - Serbán, T.

AU - Szabó, J.

AU - Nagy, G.

AU - Madléna, M.

PY - 2002/3

Y1 - 2002/3

N2 - Aim: The purpose of this study was to compare the shaping characteristics of Ni-Ti K-files and Ni-Ti S-files manipulated by hand. Methodology: A total of 60 extracted human roots were embedded in resin blocks. The embedded roots were divided into three groups: (i) roots with straight; (ii) apically curved; and (iii) continuously curved canals. Each of the three groups was randomly divided into two subgroups; one subgroup in each group was prepared with Ni-Ti K-files and the other with Ni-Ti S-files. The files were used with a step-back technique and enlarged so that the master apical file was size 30, and the canals were stepped back to size 40. The performance of the files was assessed by the superimposition of projected radiographs taken in bucco-lingual and mesio-distal directions before and after the preparation. The results were analysed statistically using analysis of covariance and Duncan's multiple range test. Results: Although canal preparation using Ni-Ti K-files was quicker, there were no statistically significant differences between file types. The Ni-Ti S-file removed significantly more material at the most coronal level (P <0.05). There were minor differences between instruments at the apical level. Only in the proximal view of apically curved canals prepared with Ni-Ti S-files was significantly more dentine removed from the outer aspect of the curvature (P <0.05). At the middle level (wide danger zone) the Ni-Ti S-files removed more dentine from the inner aspect of the curvature in those roots with apically curved canals. Conclusions: Under the conditions of this study, preparation with Ni-Ti K-files produced more appropriate shapes in roots with apically curved canals than Ni-Ti S-files.

AB - Aim: The purpose of this study was to compare the shaping characteristics of Ni-Ti K-files and Ni-Ti S-files manipulated by hand. Methodology: A total of 60 extracted human roots were embedded in resin blocks. The embedded roots were divided into three groups: (i) roots with straight; (ii) apically curved; and (iii) continuously curved canals. Each of the three groups was randomly divided into two subgroups; one subgroup in each group was prepared with Ni-Ti K-files and the other with Ni-Ti S-files. The files were used with a step-back technique and enlarged so that the master apical file was size 30, and the canals were stepped back to size 40. The performance of the files was assessed by the superimposition of projected radiographs taken in bucco-lingual and mesio-distal directions before and after the preparation. The results were analysed statistically using analysis of covariance and Duncan's multiple range test. Results: Although canal preparation using Ni-Ti K-files was quicker, there were no statistically significant differences between file types. The Ni-Ti S-file removed significantly more material at the most coronal level (P <0.05). There were minor differences between instruments at the apical level. Only in the proximal view of apically curved canals prepared with Ni-Ti S-files was significantly more dentine removed from the outer aspect of the curvature (P <0.05). At the middle level (wide danger zone) the Ni-Ti S-files removed more dentine from the inner aspect of the curvature in those roots with apically curved canals. Conclusions: Under the conditions of this study, preparation with Ni-Ti K-files produced more appropriate shapes in roots with apically curved canals than Ni-Ti S-files.

KW - Canal shaping

KW - Hand files

KW - Nickel-titanium

KW - Root canals

UR - http://www.scopus.com/inward/record.url?scp=0036513610&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0036513610&partnerID=8YFLogxK

U2 - 10.1046/j.1365-2591.2002.00492.x

DO - 10.1046/j.1365-2591.2002.00492.x

M3 - Article

VL - 35

SP - 283

EP - 288

JO - International Endodontic Journal

JF - International Endodontic Journal

SN - 0143-2885

IS - 3

ER -