• 2425 Citations
  • 27 h-Index
1987 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2020

Deformation induced soft and hard lath packets enhance ductility in martensitic steels

Ódor, É., Jóni, B., Ribárik, G., Chinh, N. Q., Ungár, T. & Szabó, P. J., May 2020, In : Crystals. 10, 5, 373.

Research output: Contribution to journalArticle

Open Access
2019

A possible stabilizing effect of work hardening on the tensile performance of superplastic materials

Chinh, N., Rácz, G., Gubicza, J., Valiev, R. Z. & Langdon, T. G., Jun 24 2019, In : Materials Science and Engineering A. 759, p. 448-454 7 p.

Research output: Contribution to journalArticle

Correlation between strain-rate sensitivity and viscous properties derived from dynamic nanoindentation of ultrafine-grained Al-Zn alloys

Chinh, N., Csanádi, T., Gubicza, J. & Valiev, R. Z., Mar 1 2019, In : MRS Communications. 9, 1, p. 310-314 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Superplasticity and High Strength in Al–Zn–Mg–Zr Alloy with Ultrafine Grains

Valiev, R. Z., Kazykhanov, V. U., Mavlyutov, A. M., Yudakhina, A. A., Chinh, N. & Murashkin, M. Y., Jan 1 2019, (Accepted/In press) In : Advanced Engineering Materials. 1900555.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)
2018

Evolution of the phase structure after different heat treatments in NiCoFeCrGa high entropy alloy

Vida, Á., Maksa, Z., Molnár, D., Huang, S., Kovac, J., Varga, L., Vitos, L. & Chinh, N., Apr 30 2018, In : Journal of Alloys and Compounds. 743, p. 234-239 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

The effect of cooling rate on the microstructure and mechanical properties of NiCoFeCrGa high-entropy alloy

Molnár, D., Vida, Á., Huang, S. & Chinh, N., Jan 1 2018, (Accepted/In press) In : Journal of Materials Science.

Research output: Contribution to journalArticle

2017

Microstructures and transition from brittle to ductile behavior of NiFeCrMoW High Entropy Alloys

Vida, Á., Chinh, N., Lendvai, J., Heczel, A. & Varga, L., May 15 2017, In : Materials Letters. 195, p. 14-17 4 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Nanoindentation measurements on a torsionally deformed Zr44Ti11Cu10Ni10Be25 bulk metallic glass

Kovács, Z., Ezzeldien, M., Chinh, N., Radnóczi, G. & Lendvai, J., Jan 1 2017, In : Journal of Alloys and Compounds. 708, p. 301-307 7 p.

Research output: Contribution to journalArticle

2016

Effects of the sp element additions on the microstructure and mechanical properties of NiCoFeCr based high entropy alloys

Vida, A., Varga, L. K., Chinh, N. Q., Molnar, D., Huang, S. & Vitos, L., Jul 4 2016, In : Materials Science and Engineering A. 669, p. 14-19 6 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Plasticity in ZrB2 micropillars induced by anomalous slip activation

Csanádi, T., Szommer, P., Chinh, N., Grasso, S., Dusza, J. & Reece, M., Feb 1 2016, In : Journal of the European Ceramic Society. 36, 3, p. 389-394 6 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion

Zhang, N. X., Chinh, N., Kawasaki, M., Huang, Y. & Langdon, T. G., Jun 1 2016, In : Materials Science and Engineering A. 666, p. 350-359 10 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2015

Microstructure decomposition and unique mechanical properties in an ultrafine-grained Al-Zn alloy processed by high-pressure torsion

Baris, A., Chinh, N. Q., Valiev, R. Z. & Langdon, T. G., Jan 1 2015, In : Kovove Materialy. 53, 4, p. 251-258 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Orientation-dependent hardness and nanoindentation-induced deformation mechanisms of WC crystals

Csanádi, T., Bl'Anda, M., Chinh, N. Q., Hvizdoš, P. & Dusza, J., Jan 15 2015, In : Acta Materialia. 83, p. 397-407 11 p.

Research output: Contribution to journalArticle

57 Citations (Scopus)
2014

Characterization of stress-strain relationships in Al over a wide range of testing temperatures

Csanádi, T., Chinh, N. Q., Gubicza, J., Vörös, G. & Langdon, T. G., Mar 1 2014, In : International Journal of Plasticity. 54, p. 178-192 15 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Deformation and fracture of β-silicon nitride micropillars

Csanádi, T., Chinh, N. Q., Szommer, P., Dusza, J., Lenčés, Z. & Šajgalík, P., Dec 3 2014, In : Journal of the American Ceramic Society. 98, 2, p. 374-377 4 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Deformation characteristics of WC micropillars

Csanádi, T., Bľanda, M., Duszová, A., Chinh, N. Q., Szommer, P. & Dusza, J., Dec 2014, In : Journal of the European Ceramic Society. 34, 15, p. 4099-4103 5 p.

Research output: Contribution to journalArticle

36 Citations (Scopus)

Grain boundary phenomena in an ultrafine-grained Al-Zn alloy with improved mechanical behavior for micro-devices

Chinh, N. Q., Valiev, R. Z., Sauvage, X., Varga, G., Havancsák, K., Kawasaki, M., Straumal, B. B. & Langdon, T. G., Aug 2014, In : Advanced Engineering Materials. 16, 8, p. 1000-1009 10 p.

Research output: Contribution to journalArticle

64 Citations (Scopus)
21 Citations (Scopus)

Thermal stability and mechanical properties of the TiCuZrPd glasses with 10, 14 and 20 at.% Pd

Sypien, A., Czeppe, T., Garzel, G., Litynska-Dobrzynska, L., Latuch, J. & Chinh, N. Q., Dec 5 2014, In : Journal of Alloys and Compounds. 615, S1, p. S108-S112

Research output: Contribution to journalArticle

7 Citations (Scopus)
2013

High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Süvegh, K., Fogarassy, Z. & Langdon, T. G., Feb 1 2013, In : Journal of Materials Science. 48, 4, p. 1675-1684 10 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Inhomogeneous softening during annealing of ultrafine-grained silver processed by HPT

Hegedus, Z., Gubicza, J., Szommer, P., Chinh, N. Q., Huang, Y. & Langdon, T. G., Nov 1 2013, In : Journal of Materials Science. 48, 21, p. 7384-7391 8 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Lábár, J. L. & Langdon, T. G., Jul 1 2013, In : Journal of Materials Science. 48, 13, p. 4637-4645 9 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2012

Macroscopic and microscopic descriptions of the plastic deformation of Fcc metals over a wide range of strain and temperature

Csanádi, T., Chinh, N. Q., Gubicza, J. & Langdon, T. G., Sep 2012, In : Acta Physica Polonica A. 122, 3, p. 630-633 4 p.

Research output: Contribution to journalArticle

Open Access

Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation

Hegeds, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Fogarassy, Z. & Langdon, T. G., Sep 25 2012, In : Journal of Alloys and Compounds. 536, SUPPL.1, p. S190-S193

Research output: Contribution to journalArticle

16 Citations (Scopus)

Strain rate sensitivity studies in an ultrafine-grained Al-30wt.% Zn alloy using micro- and nanoindentation

Chinh, N. Q., Csanádi, T., Gyori, T., Valiev, R. Z., Straumal, B. B., Kawasaki, M. & Langdon, T. G., May 1 2012, In : Materials Science and Engineering A. 543, p. 117-120 4 p.

Research output: Contribution to journalArticle

63 Citations (Scopus)
2011

Plastic behavior of fcc metals over a wide range of strain: Macroscopic and microscopic descriptions and their relationship

Csanádi, T., Chinh, N. Q., Gubicza, J. & Langdon, T. G., Apr 1 2011, In : Acta Materialia. 59, 6, p. 2385-2391 7 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)

Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing

Chowdhury, S. G., Gubicza, J., Mahato, B., Chinh, N. Q., Hegeds, Z. & Langdon, T. G., Jun 1 2011, In : Scripta Materialia. 64, 11, p. 1007-1010 4 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

The effect of impurity level on ultrafine-grained microstructures and their stability in low stacking fault energy silver

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Fogarassy, Z. & Langdon, T. G., Nov 15 2011, In : Materials Science and Engineering A. 528, 29-30, p. 8694-8699 6 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)
2010
29 Citations (Scopus)

Monitoring of self-annealing in ultrafine-grained silver using nanoindentation

Gubicza, J., Chinh, N. Q. & Langdon, T. G., Dec 1 2010, In : Nanoscience and Nanotechnology Letters. 2, 4, p. 294-297 4 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Plastic behavior of face-centered-cubic metals over a wide range of strain

Chinh, N. Q., Csanádi, T., Gubicza, J. & Langdon, T. G., Sep 1 2010, In : Acta Materialia. 58, 15, p. 5015-5021 7 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)
62 Citations (Scopus)

Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy

Valiev, R. Z., Murashkin, M. Y., Kilmametov, A., Straumal, B., Chinh, N. Q. & Langdon, T. G., Sep 1 2010, In : Journal of Materials Science. 45, 17, p. 4718-4724 7 p.

Research output: Contribution to journalArticle

97 Citations (Scopus)
2009

Correlation between microstructure and mechanical properties of severely deformed metals

Gubicza, J., Chinh, N. Q., Lábár, J. L., Dobatkin, S., Hegedus, Z. & Langdon, T. G., Aug 26 2009, In : Journal of Alloys and Compounds. 483, 1-2, p. 271-274 4 p.

Research output: Contribution to journalArticle

77 Citations (Scopus)

Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature

Chinh, N. Q., Gubicza, J., Czeppe, T., Lendvai, J., Xu, C., Valiev, R. Z. & Langdon, T. G., Aug 15 2009, In : Materials Science and Engineering A. 516, 1-2, p. 248-252 5 p.

Research output: Contribution to journalArticle

52 Citations (Scopus)

Microstructure and properties of cold consolidated amorphous ribbons from (NiCu)ZrTiAlSi alloys

Czeppe, T., Korznikova, G., Morgiel, J., Korznikov, A., Chinh, N. Q., Ochin, P. & Sypień, A., Aug 26 2009, In : Journal of Alloys and Compounds. 483, 1-2, p. 74-77 4 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Stability of microstructure in silver processed by severe plastic deformation

Gubicza, J., Chinh, N. Q., Lábár, J. L., Tichy, G., Hegedús, Z., Xu, C. & Langdon, T. G., Dec 1 2009, In : International Journal of Materials Research. 100, 6, p. 884-887 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Twinning and dislocation activity in silver processed by severe plastic deformation

Gubicza, J., Chinh, N. Q., Lábár, J. L., Hegedűs, Z. & Langdon, T. G., Mar 2009, In : Journal of Materials Science. 44, 6, p. 1656-1660 5 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
2008

Microstructure and yield strength of severely deformed silver

Gubicza, J., Chinh, N. Q., Lábár, J. L., Hegedus, Z., Xu, C. & Langdon, T. G., May 1 2008, In : Scripta Materialia. 58, 9, p. 775-778 4 p.

Research output: Contribution to journalArticle

39 Citations (Scopus)

Properties of Ni-based amorphous ribbons consolidated by high pressure torsion

Czeppe, T., Korznikova, G. F., Ochin, P., Korznikov, A. V., Chinh, N. Q. & Sypień, A., Feb 1 2008, In : Journal of Physics: Conference Series. 98, 6, 062035.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2007

Characteristics of face-centered cubic metals processed by equal-channel angular pressing

Chinh, N. Q., Gubicza, J. & Langdon, T. G., Mar 1 2007, In : Journal of Materials Science. 42, 5, p. 1594-1605 12 p.

Research output: Contribution to journalArticle

73 Citations (Scopus)

Microstructural characteristics of pure gold processed by equal-channel angular pressing

Gubicza, J., Chinh, N. Q., Szommer, P., Vinogradov, A. & Langdon, T. G., Jun 1 2007, In : Scripta Materialia. 56, 11, p. 947-950 4 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Microstructure and strength of severely deformed fcc metals

Gubicza, J., Chinh, N. Q., Csanádi, T., Langdon, T. G. & Ungár, T., Jul 25 2007, In : Materials Science and Engineering A. 462, 1-2, p. 86-90 5 p.

Research output: Contribution to journalArticle

74 Citations (Scopus)

Plastic instabilities and dislocation densities during plastic deformation in Al-Mg alloys

Horváth, G., Chinh, N. Q., Gubicza, J. & Lendvai, J., Feb 15 2007, In : Materials Science and Engineering A. 445-446, p. 186-192 7 p.

Research output: Contribution to journalArticle

48 Citations (Scopus)

The effect of severe plastic deformation on precipitation in supersaturated Al-Zn-Mg alloys

Gubicza, J., Schiller, I., Chinh, N. Q., Illy, J., Horita, Z. & Langdon, T. G., Jul 15 2007, In : Materials Science and Engineering A. 460-461, p. 77-85 9 p.

Research output: Contribution to journalArticle

141 Citations (Scopus)
2006

Flow processes at low temperatures in ultrafine-grained aluminum

Chinh, N. Q., Szommer, P., Csanádi, T. & Langdon, T. G., Oct 25 2006, In : Materials Science and Engineering A. 434, 1-2, p. 326-334 9 p.

Research output: Contribution to journalArticle

65 Citations (Scopus)
2005

Solute concentration dependence of strength and plastic instabilities in Al-Mg alloys

Horváth, G., Chinh, N. Q. & Lendvai, J., Feb 1 2005, In : Journal of Materials Research. 20, 2, p. 331-337 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Using the stress-strain relationships to propose regions of low and high temperature plastic deformation in aluminum

Chinh, N. Q., Illy, J., Horita, Z. & Langdon, T. G., Nov 25 2005, In : Materials Science and Engineering A. 410-411, p. 234-238 5 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)