• 2425 Citations
  • 27 h-Index
1987 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Deformation induced soft and hard lath packets enhance ductility in martensitic steels

Ódor, É., Jóni, B., Ribárik, G., Chinh, N. Q., Ungár, T. & Szabó, P. J., May 2020, In : Crystals. 10, 5, 373.

Research output: Contribution to journalArticle

Open Access
2019

A possible stabilizing effect of work hardening on the tensile performance of superplastic materials

Chinh, N., Rácz, G., Gubicza, J., Valiev, R. Z. & Langdon, T. G., Jun 24 2019, In : Materials Science and Engineering A. 759, p. 448-454 7 p.

Research output: Contribution to journalArticle

Characterizing Microstructural and Mechanical Properties of Al–Zn Alloys Processed by High-Pressure Torsion

Chinh, N., Szommer, P., Gubicza, J., El-Tahawy, M., Bobruk, E. V., Murashkin, M. Y. & Valiev, R. Z., Jan 1 2019, (Accepted/In press) In : Advanced Engineering Materials. 1900672.

Research output: Contribution to journalReview article

Correlation between strain-rate sensitivity and viscous properties derived from dynamic nanoindentation of ultrafine-grained Al-Zn alloys

Chinh, N., Csanádi, T., Gubicza, J. & Valiev, R. Z., Mar 1 2019, In : MRS Communications. 9, 1, p. 310-314 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Superplasticity and High Strength in Al–Zn–Mg–Zr Alloy with Ultrafine Grains

Valiev, R. Z., Kazykhanov, V. U., Mavlyutov, A. M., Yudakhina, A. A., Chinh, N. & Murashkin, M. Y., Jan 1 2019, (Accepted/In press) In : Advanced Engineering Materials. 1900555.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)
Open Access
2018

Evolution of the phase structure after different heat treatments in NiCoFeCrGa high entropy alloy

Vida, Á., Maksa, Z., Molnár, D., Huang, S., Kovac, J., Varga, L., Vitos, L. & Chinh, N., Apr 30 2018, In : Journal of Alloys and Compounds. 743, p. 234-239 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

The effect of cooling rate on the microstructure and mechanical properties of NiCoFeCrGa high-entropy alloy

Molnár, D., Vida, Á., Huang, S. & Chinh, N., Jan 1 2018, (Accepted/In press) In : Journal of Materials Science.

Research output: Contribution to journalArticle

2017

Microstructures and transition from brittle to ductile behavior of NiFeCrMoW High Entropy Alloys

Vida, Á., Chinh, N., Lendvai, J., Heczel, A. & Varga, L., May 15 2017, In : Materials Letters. 195, p. 14-17 4 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Nanoindentation measurements on a torsionally deformed Zr44Ti11Cu10Ni10Be25 bulk metallic glass

Kovács, Z., Ezzeldien, M., Chinh, N., Radnóczi, G. & Lendvai, J., Jan 1 2017, In : Journal of Alloys and Compounds. 708, p. 301-307 7 p.

Research output: Contribution to journalArticle

2016

Effects of the sp element additions on the microstructure and mechanical properties of NiCoFeCr based high entropy alloys

Vida, A., Varga, L. K., Chinh, N. Q., Molnar, D., Huang, S. & Vitos, L., Jul 4 2016, In : Materials Science and Engineering A. 669, p. 14-19 6 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Plasticity in ZrB2 micropillars induced by anomalous slip activation

Csanádi, T., Szommer, P., Chinh, N., Grasso, S., Dusza, J. & Reece, M., Feb 1 2016, In : Journal of the European Ceramic Society. 36, 3, p. 389-394 6 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion

Zhang, N. X., Chinh, N., Kawasaki, M., Huang, Y. & Langdon, T. G., Jun 1 2016, In : Materials Science and Engineering A. 666, p. 350-359 10 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
2015

Microstructure decomposition and unique mechanical properties in an ultrafine-grained Al-Zn alloy processed by high-pressure torsion

Baris, A., Chinh, N. Q., Valiev, R. Z. & Langdon, T. G., Jan 1 2015, In : Kovove Materialy. 53, 4, p. 251-258 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Orientation-dependent hardness and nanoindentation-induced deformation mechanisms of WC crystals

Csanádi, T., Bl'Anda, M., Chinh, N. Q., Hvizdoš, P. & Dusza, J., Jan 15 2015, In : Acta Materialia. 83, p. 397-407 11 p.

Research output: Contribution to journalArticle

57 Citations (Scopus)
2014

Characterization of stress-strain relationships in Al over a wide range of testing temperatures

Csanádi, T., Chinh, N. Q., Gubicza, J., Vörös, G. & Langdon, T. G., Mar 1 2014, In : International Journal of Plasticity. 54, p. 178-192 15 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Deformation and fracture of β-silicon nitride micropillars

Csanádi, T., Chinh, N. Q., Szommer, P., Dusza, J., Lenčés, Z. & Šajgalík, P., Dec 3 2014, In : Journal of the American Ceramic Society. 98, 2, p. 374-377 4 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Deformation characteristics of WC micropillars

Csanádi, T., Bľanda, M., Duszová, A., Chinh, N. Q., Szommer, P. & Dusza, J., Dec 2014, In : Journal of the European Ceramic Society. 34, 15, p. 4099-4103 5 p.

Research output: Contribution to journalArticle

36 Citations (Scopus)

Grain boundary phenomena in an ultrafine-grained Al-Zn alloy with improved mechanical behavior for micro-devices

Chinh, N. Q., Valiev, R. Z., Sauvage, X., Varga, G., Havancsák, K., Kawasaki, M., Straumal, B. B. & Langdon, T. G., Aug 2014, In : Advanced Engineering Materials. 16, 8, p. 1000-1009 10 p.

Research output: Contribution to journalArticle

64 Citations (Scopus)
21 Citations (Scopus)

Thermal stability and mechanical properties of the TiCuZrPd glasses with 10, 14 and 20 at.% Pd

Sypien, A., Czeppe, T., Garzel, G., Litynska-Dobrzynska, L., Latuch, J. & Chinh, N. Q., Dec 5 2014, In : Journal of Alloys and Compounds. 615, S1, p. S108-S112

Research output: Contribution to journalArticle

7 Citations (Scopus)
2013

High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Süvegh, K., Fogarassy, Z. & Langdon, T. G., Feb 1 2013, In : Journal of Materials Science. 48, 4, p. 1675-1684 10 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Inhomogeneous softening during annealing of ultrafine-grained silver processed by HPT

Hegedus, Z., Gubicza, J., Szommer, P., Chinh, N. Q., Huang, Y. & Langdon, T. G., Nov 1 2013, In : Journal of Materials Science. 48, 21, p. 7384-7391 8 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Lábár, J. L. & Langdon, T. G., Jul 1 2013, In : Journal of Materials Science. 48, 13, p. 4637-4645 9 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

The influence of impurity content on thermal stability of low stacking fault energy silver processed by severe plastic deformation

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Fogarassy, Z. & Langdon, T. G., Jan 1 2013, Materials Science, Testing and Informatics VI. p. 222-227 6 p. (Materials Science Forum; vol. 729).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2012

Macroscopic and microscopic descriptions of the plastic deformation of Fcc metals over a wide range of strain and temperature

Csanádi, T., Chinh, N. Q., Gubicza, J. & Langdon, T. G., Sep 2012, In : Acta Physica Polonica A. 122, 3, p. 630-633 4 p.

Research output: Contribution to journalArticle

Open Access

Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation

Hegeds, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Fogarassy, Z. & Langdon, T. G., Sep 25 2012, In : Journal of Alloys and Compounds. 536, SUPPL.1, p. S190-S193

Research output: Contribution to journalArticle

16 Citations (Scopus)

Strain rate sensitivity studies in an ultrafine-grained Al-30wt.% Zn alloy using micro- and nanoindentation

Chinh, N. Q., Csanádi, T., Gyori, T., Valiev, R. Z., Straumal, B. B., Kawasaki, M. & Langdon, T. G., May 1 2012, In : Materials Science and Engineering A. 543, p. 117-120 4 p.

Research output: Contribution to journalArticle

63 Citations (Scopus)
2011

Plastic behavior of fcc metals over a wide range of strain: Macroscopic and microscopic descriptions and their relationship

Csanádi, T., Chinh, N. Q., Gubicza, J. & Langdon, T. G., Apr 1 2011, In : Acta Materialia. 59, 6, p. 2385-2391 7 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)

Stability of ultrafine-grained microstructure in fcc metals processed by severe plastic deformation

Gubicza, J., Chinh, N. Q., Dobatkin, S. V., Khosravi, E. & Langdon, T. G., Mar 25 2011, Materials Structure and Micromechanics of Fracture VI. p. 195-198 4 p. (Key Engineering Materials; vol. 465).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing

Chowdhury, S. G., Gubicza, J., Mahato, B., Chinh, N. Q., Hegeds, Z. & Langdon, T. G., Jun 1 2011, In : Scripta Materialia. 64, 11, p. 1007-1010 4 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

The effect of grain boundary sliding and strain rate sensitivity on the ductility of ultrafine-grained materials

Chinh, N. Q., Csanádi, T., Gubicza, J., Valiev, R. Z., Straumal, B. B. & Langdon, T. G., Feb 25 2011, Nanomaterials by Severe Plastic Deformation, NanoSPD5. p. 677-682 6 p. (Materials Science Forum; vol. 667-669).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

22 Citations (Scopus)

The effect of impurity level on ultrafine-grained microstructures and their stability in low stacking fault energy silver

Hegedus, Z., Gubicza, J., Kawasaki, M., Chinh, N. Q., Fogarassy, Z. & Langdon, T. G., Nov 15 2011, In : Materials Science and Engineering A. 528, 29-30, p. 8694-8699 6 p.

Research output: Contribution to journalArticle

18 Citations (Scopus)
2010
29 Citations (Scopus)

Monitoring of self-annealing in ultrafine-grained silver using nanoindentation

Gubicza, J., Chinh, N. Q. & Langdon, T. G., Dec 1 2010, In : Nanoscience and Nanotechnology Letters. 2, 4, p. 294-297 4 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Plastic behavior of face-centered-cubic metals over a wide range of strain

Chinh, N. Q., Csanádi, T., Gubicza, J. & Langdon, T. G., Sep 1 2010, In : Acta Materialia. 58, 15, p. 5015-5021 7 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)
62 Citations (Scopus)

Processing age-hardenable alloys by Equal-Channel Angular Pressing at room temperature: Strategies and advantages

Chinh, N. Q., Gubicza, J., Czeppe, T., Lendvai, J. & Langdon, T. G., Jan 1 2010, Ductility of Bulk Nanostructured Materials. Trans Tech Publications Ltd, p. 527-534 8 p. (Materials Science Forum; vol. 633-634).

Research output: Chapter in Book/Report/Conference proceedingChapter

3 Citations (Scopus)

Unique features of ultrafine-grained microstructures in materials having low stacking fault energy

Gubicza, J., Chinh, N. Q., Lábár, J. L., Hegedus, Z. & Langdon, T. G., Dec 15 2010, Materials Science, Testing and Informatics V. p. 171-176 6 p. (Materials Science Forum; vol. 659).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy

Valiev, R. Z., Murashkin, M. Y., Kilmametov, A., Straumal, B., Chinh, N. Q. & Langdon, T. G., Sep 1 2010, In : Journal of Materials Science. 45, 17, p. 4718-4724 7 p.

Research output: Contribution to journalArticle

97 Citations (Scopus)
2009

Correlation between microstructure and mechanical properties of severely deformed metals

Gubicza, J., Chinh, N. Q., Lábár, J. L., Dobatkin, S., Hegedus, Z. & Langdon, T. G., Aug 26 2009, In : Journal of Alloys and Compounds. 483, 1-2, p. 271-274 4 p.

Research output: Contribution to journalArticle

77 Citations (Scopus)

Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature

Chinh, N. Q., Gubicza, J., Czeppe, T., Lendvai, J., Xu, C., Valiev, R. Z. & Langdon, T. G., Aug 15 2009, In : Materials Science and Engineering A. 516, 1-2, p. 248-252 5 p.

Research output: Contribution to journalArticle

52 Citations (Scopus)

Microstructure and properties of cold consolidated amorphous ribbons from (NiCu)ZrTiAlSi alloys

Czeppe, T., Korznikova, G., Morgiel, J., Korznikov, A., Chinh, N. Q., Ochin, P. & Sypień, A., Aug 26 2009, In : Journal of Alloys and Compounds. 483, 1-2, p. 74-77 4 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Stability of microstructure in silver processed by severe plastic deformation

Gubicza, J., Chinh, N. Q., Lábár, J. L., Tichy, G., Hegedús, Z., Xu, C. & Langdon, T. G., Dec 1 2009, In : International Journal of Materials Research. 100, 6, p. 884-887 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Twinning and dislocation activity in silver processed by severe plastic deformation

Gubicza, J., Chinh, N. Q., Lábár, J. L., Hegedűs, Z. & Langdon, T. G., Mar 2009, In : Journal of Materials Science. 44, 6, p. 1656-1660 5 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
2008

Delayed microstructural recovery in silver processed by equal-channel angular pressing

Gubicza, J., Chinh, N. Q., Lábár, J. L., Hegedus, Z., Szommer, P., Tichy, G. & Langdon, T. G., Aug 1 2008, In : Journal of Materials Science. 43, 16, p. 5672-5676 5 p.

Research output: Contribution to journalLetter

18 Citations (Scopus)

Effect of pre-aging on the microstructure and strength of supersaturated AlZnMg alloys processed by ECAP

Chinh, N. Q., Gubicza, J., Czeppe, T., Lendvai, J., Hegedus, Z., Xu, C. & Langdon, T. G., Jan 1 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Estrin, Y., Estrin, Y. & Maier, H. J. (eds.). Trans Tech Publications Ltd, p. 501-506 6 p. (Materials Science Forum; vol. 584-586 PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Microstructure and mechanical behavior of severely deformed f.c.c. metals

Gubicza, J., Dobatkin, S., Bakai, Z., Chinh, N. Q. & Langdon, T. G., Feb 1 2008, In : Materials Science Forum. 567-568, p. 181-184 4 p.

Research output: Contribution to journalConference article

9 Citations (Scopus)