University of Miskolc

Research Output 1985 2019

Filter
Article
2019
1 Citation (Scopus)

A revised suprageneric classification of American orthophragminids with emphasis on late Paleocene representatives from Jamaica and Alabama

Özcan, E., Mitchell, S. F., Less, G., Robinson, E., Bryan, J. R., Pignatti, J. & Yücel, A. O., Jan 1 2019, (Accepted/In press) In : Journal of Systematic Palaeontology.

Research output: Contribution to journalArticle

Paleocene
limestone
salt
mountain
morphometry

Assessment of cognitive function in female rheumatoid arthritis patients: associations with cerebrovascular pathology, depression and anxiety

Oláh, C., Kardos, Z., Andrejkovics, M., Szarka, E., Hodosi, K., Domján, A., Sepsi, M., Sas, A., Kostyál, L., Fazekas, K., Flórián, Á., Lukács, K., Miksi, Á., Baráth, Z., Kerekes, G., Péntek, M., Valikovics, A., Tamási, L., Bereczki, D. & Szekanecz, Z., Jan 1 2019, (Accepted/In press) In : Rheumatology International.

Research output: Contribution to journalArticle

Open Access
Cerebrovascular Disorders
Biological Therapy
Carotid Arteries
Methotrexate
Cognition
2 Citations (Scopus)
Suspensions
Salts
Sulfates
salts
sulfates

Electrosurface properties of Na-bentonite particles in electrolytes and surfactants solution

Mészáros, R., Jobbik, A., Varga, G. & Bárány, S., Sep 15 2019, In : Applied Clay Science. 178, 105127.

Research output: Contribution to journalArticle

Alkali Metals
Bentonite
bentonite
alkali metal
Surface-Active Agents
1 Citation (Scopus)
benthic foraminifera
biostratigraphy
Eocene
Lutetian
foraminifera
Open Access
Cerebrovascular Circulation
Feasibility Studies
stroke
blood flow
Rats

Improving the effectiveness of combined grinding processes for processing superhard materials

Kundrák, J., Fedorovich, V., Pyzhov, I. & Markopoulos, A. P., Jul 1 2019, In : Journal of Manufacturing Processes. 43, p. 270-275 6 p.

Research output: Contribution to journalArticle

Diamonds
Wheels
Wheel dressing
Processing
Diamond cutting tools
1 Citation (Scopus)

Influence of cutting ratio and tool macro geometry on process characteristics and workpiece conditions in face milling

Borysenko, D., Karpuschewski, B., Welzel, F., Kundrák, J. & Felhő, C., Jan 1 2019, (Accepted/In press) In : CIRP Journal of Manufacturing Science and Technology.

Research output: Contribution to journalArticle

Macros
Geometry
Milling (machining)
Tensile stress
Residual stresses

Porous diamond grinding wheels on ceramic binders: Design and manufacturing

Kundrák, J., Fedorenko, D. O., Fedorovich, V. A., Fedorenko, E. Y. & Ostroverkh, E. V., Jan 1 2019, In : Manufacturing Technology. 19, 3, p. 446-454 9 p.

Research output: Contribution to journalArticle

Diamond cutting tools
Binders
Diamonds
Bearings (structural)
Wheels

Productivity considerations in face milling

Kundrák, J., Molnár, V., Deszpoth, I. & Makkai, T., Jan 1 2019, In : Materials Science Forum. 952, p. 66-73 8 p.

Research output: Contribution to journalArticle

productivity
machining
Milling (machining)
Productivity
manufacturing

The change of tool life in a wide range of cutting speeds in hard turning

Kundrák, J. & Pálmai, Z., Jan 1 2019, In : Manufacturing Technology. 19, 2, p. 254-260 7 p.

Research output: Contribution to journalArticle

Degradation
Wear of materials
Machinability
Boring
Abrasion

The transient changing of forces in interrupted milling

Pálmai, Z., Kundrák, J. & Makkai, T., Jan 1 2019, In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Open Access
Milling (machining)
Exponential functions
Carbon steel
Machining
Thermodynamics

The use of the kinetic theory of gases to simulate the physical situations on the surface of autonomously moving parts during multi-energy vibration processing

Kundrák, J., Mitsyk, A. V., Fedorovich, V. A., Morgan, M. & Markopoulos, A. P., Oct 1 2019, In : Materials. 12, 19, 3054.

Research output: Contribution to journalArticle

Open Access
Kinetic theory of gases
Multi agent systems
Kinetic energy
Kinetics
Processing
2018

Analysis of extent of environment load in alternative manufacturing procedures

Kundrák, J., Varga, G. & Deszpoth, I., Jan 1 2018, In : WSEAS Transactions on Environment and Development. 14, p. 313-320 8 p.

Research output: Contribution to journalArticle

manufacturing procedure
manufacturing
Machining
lubricant
Coolants
2 Citations (Scopus)

Analysis of the effect of feed on chip size ratio and cutting forces in face milling for various cutting speeds

Kundrák, J., Markopoulos, A. P., Makkai, T., Deszpoth, I. & Nagy, A., Jan 1 2018, In : Manufacturing Technology. 18, 3, p. 431-438 8 p.

Research output: Contribution to journalArticle

Milling (machining)
Machining
2 Citations (Scopus)

Comparative analysis of machining procedures

Kundrák, J., Molnar, V. & Deszpoth, I., Jun 1 2018, In : Machines. 6, 2, 13.

Research output: Contribution to journalArticle

Open Access
Comparative Analysis
Machining
Competitiveness
Selection Procedures
Manufacturing

Correlation between chip ratio and specific forces with increasing feed per tooth and cutting speed in face milling of steel

Kundrák, J., Markopoulos, A. P., Makkai, T. & Nagy, A., Jan 1 2018, In : WSEAS Transactions on Environment and Development. 14, p. 338-346 9 p.

Research output: Contribution to journalArticle

Milling (machining)
Steel
tooth
steel
increased efficiency
2 Citations (Scopus)

Effects of setting errors (insert run-outs) on surface roughness in face milling when using circular inserts

Felhö, C. & Kundrák, J., Jun 1 2018, In : Machines. 6, 2, 14.

Research output: Contribution to journalArticle

Open Access
Surface Roughness
Roughness
Surface roughness
Face
Rotational symmetry

Evaluation of the characteristics of diamond grinding wheels at their production and operation stages

Kundrák, J., Mamalis, A. G., Fedorovich, V., Pyzhov, I. & Kryukova, N., Jan 1 2018, In : International Journal of Advanced Manufacturing Technology. 94, 1-4, p. 1131-1137 7 p.

Research output: Contribution to journalArticle

Diamond cutting tools
Diamonds
Bearings (structural)
Grinding wheels
Sintering
6 Citations (Scopus)
Carbon Nanotubes
electrokinetics
Platelets
platelets
Surface-Active Agents
Steel
Soldering alloys
Carbon steel
Dissolution
Gases
1 Citation (Scopus)

MRR-based productivity decisions in hard machining

Kundrák, J., Molnar, V. & Deszpoth, I., Jan 1 2018, In : WSEAS Transactions on Environment and Development. 14, p. 374-382 9 p.

Research output: Contribution to journalArticle

Machining
Productivity
productivity
ranking
machine tool
2 Citations (Scopus)

Nummulitids, lepidocyclinids and Sr-isotope data from the Oligocene of Kutch (western India) with chronostratigraphic and paleobiogeographic evaluations

Less, G., Frijia, G., Özcan, E., Saraswati, P. K., Parente, M. & Kumar, P., Jan 1 2018, In : Geodinamica Acta. 30, 1, p. 183-211 29 p.

Research output: Contribution to journalArticle

India
Oligocene
isotopes
isotope
evaluation

Synthesis and characterization of sulfur-containing hybrid materials based on sodium silicate

Dudarko, O. A. & Bárány, S., Jan 1 2018, In : RSC Advances. 8, 65, p. 37441-37450 10 p.

Research output: Contribution to journalArticle

Hybrid materials
Sulfur
Silicon Dioxide
Silicates
Silica
2 Citations (Scopus)

The nano heat effect of replacing macro-particles by nano-particles in drop calorimetry: The case of core/shell metal/oxide nano-particles

Yakymovych, A., Kaptay, G., Flandorfer, H., Bernardi, J., Schwarz, S. & Ipser, H., Jan 1 2018, In : RSC Advances. 8, 16, p. 8856-8869 14 p.

Research output: Contribution to journalArticle

Calorimetry
Thermal effects
Oxides
Macros
Metals
2017
3 Citations (Scopus)

Assessment of intracranial vessels in association with carotid atherosclerosis and brain vascular lesions in rheumatoid arthritis

Oláh, C., Kardos, Z., Sepsi, M., Sas, A., Kostyál, L., Bhattoa, H., Hodosi, K., Kerekes, G., Tamási, L., Valikovics, A., Bereczki, D. & Szekanecz, Z., Sep 26 2017, In : Arthritis Research and Therapy. 19, 1, 213.

Research output: Contribution to journalArticle

Carotid Artery Diseases
Blood Vessels
Rheumatoid Arthritis
Middle Cerebral Artery
Brain
2 Citations (Scopus)

Assessment of the performance of neural networks models for the prediction of surface roughness after grinding of steels

Karkalos, N. E., Kundrák, J. & Markopoulos, A. P., Mar 1 2017, In : International Journal of Artificial Intelligence. 15, 1, p. 55-75 21 p.

Research output: Contribution to journalArticle

Surface roughness
Multilayer neural networks
Neural networks
Steel
Soft computing
2 Citations (Scopus)

Coloring hot-dip galvanization of steel samples in industrial zinc-manganese baths

Godzsák, M., Lévai, G., Vad, K., Csík, A., Hakl, J., Kulcsár, T. & Kaptay, G., Jan 1 2017, In : Journal of Mining and Metallurgy, Section B: Metallurgy. 53, 3, p. 319-326 8 p.

Research output: Contribution to journalArticle

Steel
Coloring
Manganese
Zinc
dip
3 Citations (Scopus)

Comparative study of Cr(III) adsorption by carbon nanotubes and active carbons

Manilo, M. V., Choma, Z. Z. & Bárány, S., Mar 1 2017, In : Colloid Journal. 79, 2, p. 212-218 7 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Chromium
Carbon nanotubes
Carbon
carbon nanotubes
12 Citations (Scopus)
Gibbs free energy
derivation
requirements
Surface tension
interfacial tension
6 Citations (Scopus)

Effect of Wetting Agent and Carbide Volume Fraction on the Wear Response of Aluminum Matrix Composites Reinforced by WC Nanoparticles and Aluminide Particles

Lekatou, A., Gkikas, N., Karantzalis, A. E., Kaptay, G., Gacsi, Z., Baumli, P. & Simon, A., Jun 1 2017, In : Archives of Metallurgy and Materials. 62, 2, p. 1235-1242 8 p.

Research output: Contribution to journalArticle

Wetting Agents
Wetting agents
Aluminum
Carbides
Volume fraction
11 Citations (Scopus)

Integrated stratigraphy of the Priabonian (upper Eocene) Urtsadzor section, Armenia

Cotton, L. J., Zakrevskaya, E. Y., van der Boon, A., Asatryan, G., Hayrapetyan, F., Israyelyan, A., Krijgsman, W., Less, G., Monechi, S., Papazzoni, C. A., Pearson, P. N., Razumovskiy, A., Renema, W., Shcherbinina, E. & Bridget, S. W., Jan 1 2017, In : Newsletters on Stratigraphy. 50, 3, p. 269-295 27 p.

Research output: Contribution to journalArticle

nanofossil
Eocene
stratigraphy
extinction
biostratigraphy
4 Citations (Scopus)

Numerical examination of residual stresses developing during hard turning at different rake angles

Kundrák, J., Mamalis, A. G., Szabó, G., Pálmai, Z. & Gyáni, K., Mar 1 2017, In : International Journal of Advanced Manufacturing Technology. 89, 5-8, p. 1989-1999 11 p.

Research output: Contribution to journalArticle

Residual stresses
Compressive stress
29 Citations (Scopus)

The Central Paratethys palaeoceanography: A water circulation model based on microfossil proxies, climate, and changes of depositional environment

Kovác, M., Hudáčková, N., Halásová, E., Kováčová, M., Holcová, K., Oszczypko-Clowes, M., Báldi, K., Less, G., Nagymarosy, A., Ruman, A., Klučiar, T. & Jamrich, M., Jan 1 2017, In : Acta Geologica Slovaca. 9, 2, p. 75-114 40 p.

Research output: Contribution to journalArticle

water circulation
Paratethys
paleoceanography
microfossil
depositional environment
6 Citations (Scopus)

The effect of the shape of chip cross section on cutting force and roughness when increasing feed in face milling

Kundrák, J., Gyáni, K., Felho, C. & Deszpoth, I., Jan 1 2017, In : Manufacturing Technology. 17, 3, p. 335-342 8 p.

Research output: Contribution to journalArticle

Surface roughness
Milling (machining)
21 Citations (Scopus)
Steel
Microhardness
Heat treatment
Coatings
Microstructure
3 Citations (Scopus)

Theoretical analysis of the contact area between grinding wheel surface and workpiece in flat face grinding with spindle axis inclination

Kundrák, J., Fedorovich, V., Pyzhov, I., Markopoulos, A. P., Klimenko, V. & Kryukova, N., Jan 1 2017, In : Manufacturing Technology. 17, 2, p. 203-210 8 p.

Research output: Contribution to journalArticle

Grinding wheels
Wheels
Processing
2016
15 Citations (Scopus)

3D roughness parameters of surfaces face milled by special tools

Kundrák, J. & Felho, C., Jun 1 2016, In : Manufacturing Technology. 16, 3, p. 532-538 7 p.

Research output: Contribution to journalArticle

Surface roughness
Geometry
Cutting tools
Computer aided design
Planning

Angioneuroticus oedema elofordulasa ischaemias stroke miatt rt-pa-val kezelt betegekben

Translated title of the contribution: Angioneuritic edema in ischaemic stroke patients treated with rt-paRita, L., Attila, S., Tibor, K., Edina, P., Istvdn, F., Erika, B. & Valikovics, A., Jul 30 2016, In : Ideggyogyaszati Szemle. 69, 7-8, p. 239-243 5 p.

Research output: Contribution to journalArticle

Angioedema
Edema
Stroke
Angiotensin-Converting Enzyme Inhibitors
Fibrinolysin
2 Citations (Scopus)
Tin refining
Tin
Soldering
tin
Chlorides
7 Citations (Scopus)

Designing the Color of Hot-Dip Galvanized Steel Sheet Through Destructive Light Interference Using a Zn-Ti Liquid Metallic Bath

Levai, G., Godzsák, M., Török, T. I., Hakl, J., Takáts, V., Csík, A., Vad, K. & Kaptay, G., May 9 2016, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-17 17 p.

Research output: Contribution to journalArticle

Light interference
Steel sheet
baths
steels
Color
5 Citations (Scopus)

Diamond grinding wheels production study with the use of the finite element method

Kundrák, J., Fedorovich, V., Markopoulos, A. P., Pyzhov, I. & Kryukova, N., Nov 1 2016, In : Journal of Advanced Research. 7, 6, p. 1057-1064 8 p.

Research output: Contribution to journalArticle

Diamond cutting tools
Finite element method
Diamonds
Sintering
Thermal expansion
1 Citation (Scopus)

Electrokinetic properties and stability of cerium dioxide suspensions

Bárány, S., Bohacs, K., Chepurna, I. & Meszaros, R., 2016, In : RSC Advances. 6, 73, p. 69343-69351 9 p.

Research output: Contribution to journalArticle

Cerium
Suspensions
Cerium compounds
Salts
Surface charge
14 Citations (Scopus)

Enthalpy effect of adding cobalt to liquid Sn-3.8Ag-0.7Cu lead-free solder alloy: Difference between bulk and nanosized cobalt

Yakymovych, A., Kaptay, G., Roshanghias, A., Flandorfer, H. & Ipser, H., Jan 28 2016, In : Journal of Physical Chemistry C. 120, 3, p. 1881-1890 10 p.

Research output: Contribution to journalArticle

solders
Cobalt
Enthalpy
liquid alloys
cobalt

Experimental and numerical investigation of the influence of cutting speed and feed rate on forces in turning of steel

Kundrák, J., Szabó, G. & Markopoulos, A. P., 2016, In : Materials Science Forum. 862, p. 270-277 8 p.

Research output: Contribution to journalArticle

Steel
steels
Process planning
strain rate
planning
9 Citations (Scopus)

FEM/AI models for the simulation of precision grinding

Markopoulos, A. P. & Kundrák, J., Jan 1 2016, In : Manufacturing Technology. 16, 2, p. 384-390 7 p.

Research output: Contribution to journalArticle

Finite element method
Soft computing
Artificial intelligence
Neural networks
Industry
15 Citations (Scopus)

Melting Point Depression and Fast Diffusion in Nanostructured Brazing Fillers Confined Between Barrier Nanolayers

Kaptay, G., Janczak-Rusch, J. & Jeurgens, L. P. H., May 25 2016, (Accepted/In press) In : Journal of Materials Engineering and Performance. p. 1-10 10 p.

Research output: Contribution to journalArticle

Brazing
Melting point
Fillers
Multilayers
Temperature
24 Citations (Scopus)
Grain boundaries
Nickel
Temperature
Phase diagrams
Chemical analysis
3 Citations (Scopus)

Odd partnerships among middle Eocene (Bartonian) Nummulites: Examples from the Transylvanian (Romania) and Dorog (Hungary) Basins

Kövecsi, S. A., Silye, L., Less, G. & Filipescu, S., Sep 1 2016, In : Marine Micropaleontology. 127, p. 86-98 13 p.

Research output: Contribution to journalArticle

Eocene
basin
test
Ternary systems
Phase diagrams