University of Miskolc

Research Output 1985 2019

2019

Analysis of material removal efficiency in face milling of aluminum alloy

Kundrák, J., Molnár, V., Makkai, T. & Dági, T., Jan 1 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 393-404 12 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

Milling (machining)
Aluminum alloys
Machining
Diamond
Diamonds
1 Citation (Scopus)

A revised suprageneric classification of American orthophragminids with emphasis on late Paleocene representatives from Jamaica and Alabama

Özcan, E., Mitchell, S. F., Less, G., Robinson, E., Bryan, J. R., Pignatti, J. & Yücel, A. O., Jan 1 2019, (Accepted/In press) In : Journal of Systematic Palaeontology.

Research output: Contribution to journalArticle

Paleocene
limestone
salt
mountain
morphometry

Assessment of cognitive function in female rheumatoid arthritis patients: associations with cerebrovascular pathology, depression and anxiety

Oláh, C., Kardos, Z., Andrejkovics, M., Szarka, E., Hodosi, K., Domján, A., Sepsi, M., Sas, A., Kostyál, L., Fazekas, K., Flórián, Á., Lukács, K., Miksi, Á., Baráth, Z., Kerekes, G., Péntek, M., Valikovics, A., Tamási, L., Bereczki, D. & Szekanecz, Z., Jan 1 2019, (Accepted/In press) In : Rheumatology International.

Research output: Contribution to journalArticle

Open Access
Cerebrovascular Disorders
Biological Therapy
Carotid Arteries
Methotrexate
Cognition
2 Citations (Scopus)
Suspensions
Salts
Sulfates
salts
sulfates

Electrosurface properties of Na-bentonite particles in electrolytes and surfactants solution

Mészáros, R., Jobbik, A., Varga, G. & Bárány, S., Sep 15 2019, In : Applied Clay Science. 178, 105127.

Research output: Contribution to journalArticle

Alkali Metals
Bentonite
bentonite
alkali metal
Surface-Active Agents
1 Citation (Scopus)
benthic foraminifera
biostratigraphy
Eocene
Lutetian
foraminifera
Open Access
Cerebrovascular Circulation
Feasibility Studies
stroke
blood flow
Rats

Improving the effectiveness of combined grinding processes for processing superhard materials

Kundrák, J., Fedorovich, V., Pyzhov, I. & Markopoulos, A. P., Jul 1 2019, In : Journal of Manufacturing Processes. 43, p. 270-275 6 p.

Research output: Contribution to journalArticle

Diamonds
Wheels
Wheel dressing
Processing
Diamond cutting tools
1 Citation (Scopus)

Influence of cutting ratio and tool macro geometry on process characteristics and workpiece conditions in face milling

Borysenko, D., Karpuschewski, B., Welzel, F., Kundrák, J. & Felhő, C., Jan 1 2019, (Accepted/In press) In : CIRP Journal of Manufacturing Science and Technology.

Research output: Contribution to journalArticle

Macros
Geometry
Milling (machining)
Tensile stress
Residual stresses
calcarenite
paleobiogeography
strontium isotope
benthic foraminifera
biostratigraphy

Porous diamond grinding wheels on ceramic binders: Design and manufacturing

Kundrák, J., Fedorenko, D. O., Fedorovich, V. A., Fedorenko, E. Y. & Ostroverkh, E. V., Jan 1 2019, In : Manufacturing Technology. 19, 3, p. 446-454 9 p.

Research output: Contribution to journalArticle

Diamond cutting tools
Binders
Diamonds
Bearings (structural)
Wheels

Productivity considerations in face milling

Kundrák, J., Molnár, V., Deszpoth, I. & Makkai, T., Jan 1 2019, In : Materials Science Forum. 952, p. 66-73 8 p.

Research output: Contribution to journalArticle

productivity
machining
Milling (machining)
Productivity
manufacturing

The change of tool life in a wide range of cutting speeds in hard turning

Kundrák, J. & Pálmai, Z., Jan 1 2019, In : Manufacturing Technology. 19, 2, p. 254-260 7 p.

Research output: Contribution to journalArticle

Degradation
Wear of materials
Machinability
Boring
Abrasion

The examination of cutting force as function of depth of cut in cases with constant and changing chip cross section

Kundrák, J., Markopoulos, A. P., Karkalos, N. E. & Makkai, T., Jan 1 2019, Lecture Notes in Mechanical Engineering. Pleiades Publishing, p. 405-415 11 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

Milling (machining)
Steel
Machining
Experiments

The transient changing of forces in interrupted milling

Pálmai, Z., Kundrák, J. & Makkai, T., Jan 1 2019, In : International Journal of Advanced Manufacturing Technology.

Research output: Contribution to journalArticle

Open Access
Milling (machining)
Exponential functions
Carbon steel
Machining
Thermodynamics

The use of the kinetic theory of gases to simulate the physical situations on the surface of autonomously moving parts during multi-energy vibration processing

Kundrák, J., Mitsyk, A. V., Fedorovich, V. A., Morgan, M. & Markopoulos, A. P., Oct 1 2019, In : Materials. 12, 19, 3054.

Research output: Contribution to journalArticle

Open Access
Kinetic theory of gases
Multi agent systems
Kinetic energy
Kinetics
Processing
2018

3D Molecular Dynamics model for nano-machining of fcc and bcc materials

Karkalos, N. E., Markopoulos, A. P. & Kundrák, J., Jan 1 2018, In : Procedia CIRP. 77, p. 203-206 4 p.

Research output: Contribution to journalConference article

Molecular dynamics
Dynamic models
Machining
Precision engineering
Nickel

Analysis of extent of environment load in alternative manufacturing procedures

Kundrák, J., Varga, G. & Deszpoth, I., Jan 1 2018, In : WSEAS Transactions on Environment and Development. 14, p. 313-320 8 p.

Research output: Contribution to journalArticle

manufacturing procedure
manufacturing
Machining
lubricant
Coolants

Analysis of machining time and material removal performance as factors influencing efficiency and profitability

Kundrák, J., Molnar, V. & Deszpoth, I., Jan 1 2018, Lecture Notes in Mechanical Engineering. 9783319756769 ed. Pleiades Publishing, p. 268-279 12 p. (Lecture Notes in Mechanical Engineering; no. 9783319756769).

Research output: Chapter in Book/Report/Conference proceedingChapter

Profitability
Machining
Surface properties
Automotive industry
Abrasives
2 Citations (Scopus)

Analysis of the effect of feed on chip size ratio and cutting forces in face milling for various cutting speeds

Kundrák, J., Markopoulos, A. P., Makkai, T., Deszpoth, I. & Nagy, A., Jan 1 2018, In : Manufacturing Technology. 18, 3, p. 431-438 8 p.

Research output: Contribution to journalArticle

Milling (machining)
Machining
2 Citations (Scopus)

Comparative analysis of machining procedures

Kundrák, J., Molnar, V. & Deszpoth, I., Jun 1 2018, In : Machines. 6, 2, 13.

Research output: Contribution to journalArticle

Open Access
Comparative Analysis
Machining
Competitiveness
Selection Procedures
Manufacturing

Correlation between chip ratio and specific forces with increasing feed per tooth and cutting speed in face milling of steel

Kundrák, J., Markopoulos, A. P., Makkai, T. & Nagy, A., Jan 1 2018, In : WSEAS Transactions on Environment and Development. 14, p. 338-346 9 p.

Research output: Contribution to journalArticle

Milling (machining)
Steel
tooth
steel
increased efficiency

Correlation between process parameters and cutting forces in the face milling of steel

Kundrák, J., Markopoulos, A. P., Makkai, T. & Karkalos, N. E., Jan 1 2018, Lecture Notes in Mechanical Engineering. 9783319756769 ed. Pleiades Publishing, p. 255-267 13 p. (Lecture Notes in Mechanical Engineering; no. 9783319756769).

Research output: Chapter in Book/Report/Conference proceedingChapter

Milling (machining)
Steel
Design of experiments
Surface properties
Statistical methods
2 Citations (Scopus)

Determination of specific cutting force components and exponents when applying high feed rates

Karpuschewski, B., Kundrák, J., Varga, G., Deszpoth, I. & Borysenko, D., Jan 1 2018, In : Procedia CIRP. 77, p. 30-33 4 p.

Research output: Contribution to journalConference article

Fixtures (tooling)
Cutting tools
Machine tools
Machining
Productivity
3 Citations (Scopus)

Effects of setting errors (insert run-outs) on surface roughness in face milling when using circular inserts

Felhö, C. & Kundrák, J., Jun 1 2018, In : Machines. 6, 2, 14.

Research output: Contribution to journalArticle

Open Access
Surface Roughness
Roughness
Surface roughness
Face
Rotational symmetry

Effects of the tool edge design on the roughness of face milled surfaces

Karpuschewski, B., Kundrák, J., Felho, C., Varga, G. & Borysenko, D., Nov 30 2018, In : IOP Conference Series: Materials Science and Engineering. 448, 1, 012056.

Research output: Contribution to journalConference article

Surface roughness
Geometry
Rigidity
Machining

Evaluation of the characteristics of diamond grinding wheels at their production and operation stages

Kundrák, J., Mamalis, A. G., Fedorovich, V., Pyzhov, I. & Kryukova, N., Jan 1 2018, In : International Journal of Advanced Manufacturing Technology. 94, 1-4, p. 1131-1137 7 p.

Research output: Contribution to journalArticle

Diamond cutting tools
Diamonds
Bearings (structural)
Grinding wheels
Sintering
7 Citations (Scopus)
Carbon Nanotubes
electrokinetics
Platelets
platelets
Surface-Active Agents
Steel
Soldering alloys
Carbon steel
Dissolution
Gases
2 Citations (Scopus)

Investigation of the topography of face milled surfaces

Kundrák, J. & Felhő, C., Jan 1 2018, Materials Science Forum. Trans Tech Publications Ltd, p. 78-83 6 p. (Materials Science Forum; vol. 919).

Research output: Chapter in Book/Report/Conference proceedingChapter

Topography
topography
Surface roughness
Surface topography
roughness

Machining of rotationally symmetric parts with abrasive waterjet

Kun-Bodnár, K., Kundrák, J. & Maros, Z., Nov 30 2018, In : IOP Conference Series: Materials Science and Engineering. 448, 1, 012053.

Research output: Contribution to journalConference article

Abrasives
Machining
Water
Kinematics
Geometry
1 Citation (Scopus)

MRR-based productivity decisions in hard machining

Kundrák, J., Molnar, V. & Deszpoth, I., Jan 1 2018, In : WSEAS Transactions on Environment and Development. 14, p. 374-382 9 p.

Research output: Contribution to journalArticle

Machining
Productivity
productivity
ranking
machine tool

Nanometric face milling simulations using MD method

Markopoulos, A. P., Karkalos, N. E. & Kundrák, J., Nov 30 2018, In : IOP Conference Series: Materials Science and Engineering. 448, 1, 012006.

Research output: Contribution to journalConference article

Numerical methods
Soft computing
Continuum mechanics
Cutting tools
Surface properties
2 Citations (Scopus)

Nummulitids, lepidocyclinids and Sr-isotope data from the Oligocene of Kutch (western India) with chronostratigraphic and paleobiogeographic evaluations

Less, G., Frijia, G., Özcan, E., Saraswati, P. K., Parente, M. & Kumar, P., Jan 1 2018, In : Geodinamica Acta. 30, 1, p. 183-211 29 p.

Research output: Contribution to journalArticle

India
Oligocene
isotopes
isotope
evaluation
2 Citations (Scopus)

Preliminary investigations for the effect of cutting tool edge geometry in high-feed face milling

Karpuschewski, B., Kundrák, J., Felhő, C., Varga, G., Sztankovics, I., Makkai, T. & Borysenko, D., Jan 1 2018, Lecture Notes in Mechanical Engineering. 9783319756769 ed. Pleiades Publishing, p. 241-254 14 p. (Lecture Notes in Mechanical Engineering; no. 9783319756769).

Research output: Chapter in Book/Report/Conference proceedingChapter

Milling (machining)
Cutting tools
Geometry
Machining
Seats

Productivity analysis of machining milled surfaces

Kundrák, J., Molnár, V. & Deszpoth, I., Nov 30 2018, In : IOP Conference Series: Materials Science and Engineering. 448, 1, 012012.

Research output: Contribution to journalConference article

Machining
Productivity
Milling (machining)
Diamond
Machine tools

Synthesis and characterization of sulfur-containing hybrid materials based on sodium silicate

Dudarko, O. A. & Bárány, S., Jan 1 2018, In : RSC Advances. 8, 65, p. 37441-37450 10 p.

Research output: Contribution to journalArticle

Hybrid materials
Sulfur
Silicon Dioxide
Silicates
Silica
2 Citations (Scopus)

The nano heat effect of replacing macro-particles by nano-particles in drop calorimetry: The case of core/shell metal/oxide nano-particles

Yakymovych, A., Kaptay, G., Flandorfer, H., Bernardi, J., Schwarz, S. & Ipser, H., Jan 1 2018, In : RSC Advances. 8, 16, p. 8856-8869 14 p.

Research output: Contribution to journalArticle

Calorimetry
Thermal effects
Oxides
Macros
Metals
1 Citation (Scopus)

Topography of the machined surface in high performance face milling

Kundrák, J. & Felho, C., Jan 1 2018, In : Procedia CIRP. 77, p. 340-343 4 p.

Research output: Contribution to journalConference article

Topography
Surface roughness
Geometry
Surface topography
Computer aided design
2017

A method for the determination of theoretical roughness in face milling considering the run-out of the inserts

Felho, C. & Kundrák, J., Jan 1 2017, Precision Machining IX - ICPM 2017. Trans Tech Publications Ltd, p. 251-258 8 p. (Solid State Phenomena; vol. 261 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

inserts
roughness
Surface roughness
Geometry
Surface topography
6 Citations (Scopus)

A new strategy in face milling - inverse cutting technology

Karpuschewski, B., Kundrák, J., Emmer, T. & Borysenko, D., Jan 1 2017, Precision Machining IX - ICPM 2017. Trans Tech Publications Ltd, p. 331-338 8 p. (Solid State Phenomena; vol. 261 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling (machining)
chips
flat surfaces
Boundary conditions
boundary conditions
2 Citations (Scopus)

Anomalous interfacial architecture in laponite aqueous suspensions on a gold surface

Manilo, M., Boltovets, P., Snopok, B., Bárány, S. & Lebovka, N., May 5 2017, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 520, p. 883-891 9 p.

Research output: Contribution to journalReview article

Platelets
platelets
Gold
Refractive index
Suspensions
4 Citations (Scopus)

Assessment of intracranial vessels in association with carotid atherosclerosis and brain vascular lesions in rheumatoid arthritis

Oláh, C., Kardos, Z., Sepsi, M., Sas, A., Kostyál, L., Bhattoa, H., Hodosi, K., Kerekes, G., Tamási, L., Valikovics, A., Bereczki, D. & Szekanecz, Z., Sep 26 2017, In : Arthritis Research and Therapy. 19, 1, 213.

Research output: Contribution to journalArticle

Carotid Artery Diseases
Blood Vessels
Rheumatoid Arthritis
Middle Cerebral Artery
Brain
2 Citations (Scopus)

Assessment of the performance of neural networks models for the prediction of surface roughness after grinding of steels

Karkalos, N. E., Kundrák, J. & Markopoulos, A. P., Mar 1 2017, In : International Journal of Artificial Intelligence. 15, 1, p. 55-75 21 p.

Research output: Contribution to journalArticle

Surface roughness
Multilayer neural networks
Neural networks
Steel
Soft computing
2 Citations (Scopus)

Coloring hot-dip galvanization of steel samples in industrial zinc-manganese baths

Godzsák, M., Lévai, G., Vad, K., Csík, A., Hakl, J., Kulcsár, T. & Kaptay, G., Jan 1 2017, In : Journal of Mining and Metallurgy, Section B: Metallurgy. 53, 3, p. 319-326 8 p.

Research output: Contribution to journalArticle

Steel
Coloring
Manganese
Zinc
dip
3 Citations (Scopus)

Comparative study of Cr(III) adsorption by carbon nanotubes and active carbons

Manilo, M. V., Choma, Z. Z. & Bárány, S., Mar 1 2017, In : Colloid Journal. 79, 2, p. 212-218 7 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Chromium
Carbon nanotubes
Carbon
carbon nanotubes
12 Citations (Scopus)
Gibbs free energy
derivation
requirements
Surface tension
interfacial tension
6 Citations (Scopus)

Effect of Wetting Agent and Carbide Volume Fraction on the Wear Response of Aluminum Matrix Composites Reinforced by WC Nanoparticles and Aluminide Particles

Lekatou, A., Gkikas, N., Karantzalis, A. E., Kaptay, G., Gacsi, Z., Baumli, P. & Simon, A., Jun 1 2017, In : Archives of Metallurgy and Materials. 62, 2, p. 1235-1242 8 p.

Research output: Contribution to journalArticle

Wetting Agents
Wetting agents
Aluminum
Carbides
Volume fraction
8 Citations (Scopus)

Effects of technological parameters on surface characteristics in face milling

Varga, G. & Kundrák, J., Jan 1 2017, Precision Machining IX - ICPM 2017. Trans Tech Publications Ltd, p. 285-292 8 p. (Solid State Phenomena; vol. 261 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

flatness
Aluminum
surface roughness
manufacturing
examination
11 Citations (Scopus)

Integrated stratigraphy of the Priabonian (upper Eocene) Urtsadzor section, Armenia

Cotton, L. J., Zakrevskaya, E. Y., van der Boon, A., Asatryan, G., Hayrapetyan, F., Israyelyan, A., Krijgsman, W., Less, G., Monechi, S., Papazzoni, C. A., Pearson, P. N., Razumovskiy, A., Renema, W., Shcherbinina, E. & Bridget, S. W., Jan 1 2017, In : Newsletters on Stratigraphy. 50, 3, p. 269-295 27 p.

Research output: Contribution to journalArticle

nanofossil
Eocene
stratigraphy
extinction
biostratigraphy